Every Workorder from Datatronic Control, Inc. contains the amount of WATTS the sign will use. Since our displays are based on 120 volt. Just divide the number of WATTS by VOLTS to get your AMPS.
No. Our signs are built to operate in extreme conditions without the aid of an Air Conditioning Unit.
The minimum amount of spacing needed for ventilation is 2" from where the vents are installed.
I have contacted a Certified Electrician and he is inquiring as to what he will be responsible for performing during the installation.
Below is a typical list of all responsibilities that the electrician will need to handle. 1. All Electrical work must be done prior to any sign structure placement,installation, or visit for the Turn-On/Training service (if purchased) by DCI. 2. Install recommended grounding for the area – at least (1) 8’ Copper rod. 3. Install all [...]
No. All Electrical work must be performed by a Certified Electrician. It is the customer's responsibility to contact a Certified Electrician for the install.